Skip to main content
Calibration Laboratory LF - Testo Industrial Services

Wide scope of accreditation

Electrical measuring parameters.

Calibration

Electrical measuring parameters

Calibration in the LF and HF range/calibration of measuring modules

Testo Industrial Services is distinguished by its broad scope of accreditation and the lowest measurement uncertainties in electrical calibrations. From standard multimeters to high-quality RF devices or reference standards, we calibrate electrical test equipment from all manufacturers. High-quality equipment and employees with the highest metrological expertise guarantee the quality of the calibration.

Our DAkkS accreditations in the LF and HF range are recognised for laboratory and on-site calibrations. Take a look at our accreditation certificate.

The measurement of a wide variety of electrical quantities is paramount in almost all industries today. Standard electrical measuring instruments such as digital multimeters, oscilloscopes, current probes, insulation meters, power meters, and mains adapters, etc., are often in daily use and should therefore be calibrated at regular intervals. These types of electrical measuring instruments are calibrated in the low frequency laboratory (LF laboratory) of Testo Industrial Services. We carry out ISO and DAkkS calibrations irrespective of manufacturer using high quality reference equipment.

Scope of the calibration
 

  • Visual inspection and cleaning
  • Technical inspection of equipment functions
  • Calibration certificate with target/actual values and measurement uncertainties
  • Calibration identification with calibration labelling
  • Repair, replacement and adjustment in consultation
Calibration Laboratory LF - Testo Industrial Services

In addition to calibrating LF measuring instruments, Testo Industrial Services is also specialises in high frequency measuring technology. Testo Industrial Services’ HF laboratory has top expertise at its disposal and accreditations complying with DIN EN ISO/IEC 17025 for the calibration of highly specialised HF equipment. This includes signal/spectrum analysers, signal generators, oscilloscopes, HF amplifiers, calibration kits or attenuators. We calibrate this type of HF equipment up to 50 GHz in our accredited facilities or directly on site at your company.

An EMC measuring station for the calibration of EMC measuring technology rounds off our portfolio. What distinguishes us is our many years of experience in calibration, for example, of EMI test receivers, network simulations, surge generators, coupling networks, radio measuring stations and much, much more. Benefit from our expertise.

Scope of the calibration

  • Visual inspection and cleaning
  • Technical inspection of equipment functions
  • Calibration certificate with target/actual values and measurement uncertainties
  • Calibration identification with calibration marking
  • Repair, replacement and adjustment in consultation

 

Calibration Laboratory LF - Testo Industrial Services

In Testo Industrial Services’ primary electrical laboratory, we calibrate your high-quality reference standards of electrical LF measuring technology. Our references are directly connected to state institutes (PTB, METAS) and are used to trace your reference standards.

The measurement uncertainties assigned to the accredited calibration procedures are among the smallest of all DAkkS laboratories (see accreditation certificate). For example, resistance standards can be calibrated with a measurement uncertainty from 55 x 10-9 – that is unique in Europe.

Scope of the calibration
 

  • Visual inspection and cleaning
  • Technical inspection of equipment functions
  • Calibration certificate with target/actual values and measurement uncertainties
  • Calibration identification with calibration labelling
  • Repair, replacement and adjustment in consultation
Calibration Laboratory LF - Testo Industrial Services

In the automotive industry, a wide variety of measuring modules are used in the field of research and development. Regular calibration of these measuring modules in different application and ambient conditions (from -40 °C to 125 °C) assures the vehicle manufacturers of reliable measurement results.

As an accredited calibration laboratory complying with DIN EN ISO/IEC 17025, Testo Industrial Services has the highest of quality standards and fully fulfils the requirements of IATF 16949:2016. We calibrate measuring modules from all manufacturers (IPETRONIK, CSM, ETAS, HBM, IMC, Klaric, etc.) – also as a traceable ISO/factory calibration as a matter of course.

Scope of the calibration
 

  • Visual inspection and cleaning
  • Technical inspection of equipment functions
  • Calibration certificate with target/actual values and measurement uncertainties
  • Calibration identification with calibration labelling
  • Repair, replacement and adjustment in consultation
  • Accreditation certificate
  • Measurement uncertainty guide
Calibration of measuring modules - Testo Industrial Services

Minimal measuring uncertainties

Primary laboratory

Cross-sector expertise

Success stories

Testo Industrial Services – your full-service provider

What sets us apart

More assurance, better service

Testo Industrial Services is a certified service provider for quality assurance and accredited for more than 200 calibration procedures in accordance with DIN EN ISO/IEC 17025.

Quality from one provider

With its more than 25 years of calibration experience, Testo Industrial Services’ proven procedures and individual services will ensure the quality of your test equipment – irrespective of the manufacturer.

Individual technical support

We always have the right concept to suit your requirements. From calibration, test equipment management to the logistics solution.

Your contact

Please call us at:

obligatory field *